Back at Saloni Milano 2010 Ronan Bouroullec told us about his feeling that the internet and new technology could, perhaps even should, eventually, replace the resources and time invested – and ultimately wasted -  every year in an event such as Milan Furniture Fair.

In 2013 everyone’s favourite German conceptual contemporary furniture manufacturer Moormann, have made the start.

And in doing so proved that even from the pastoral calm of Aschau im Chiemgau, one can still be part of the Milan madness.

In our conversations with Moormann ahead of Milan they told us we could “look forward” to what they were organising in place of their regular Saloni Milano stand.

Which is a nice line in modest understatement one dosen’t normally associate with Moormänner…..

For rather than investing in the faltering Italian economy, Moormann have created a celluloid masterpiece!

To make things easier we’ve embedded the film here. The original can be found at: www.youtube.com/watch?v=Z8GwMxAsHnc

In little under a week the Doors of Hell will once again open to release Milan Design Week on our unsympathetic, unapologetic world.

The normally pleasant, quiet and reasonably priced Lombardian metropolis will be overrun by molten rivers of corporate greed and naive student hope, transforming the canals, parks and former industrial sites into burning pits of contradiction, imitation and pure gold.

Survival is a question of ignoring reality and convincing yourself that everything is brilliant and that you are having a really, really good time.

Technically, the same procedure as every year…..

….. only this year one of the saner heads in the madness will sadly be missing: Moormann ain’t going.

Milan Design Week 2013: Moormann non è presente

Essentially the reason is dissatisfaction with the stand they were offered at the furniture fair and a general unhappiness with the way the whole process was/is organised and communicated.

When we spoke to Nils Holger Moormann in 2011 he commented on the problems of the stand distribution in Milan.

And in recent conversations with senior managers from other contemporary furniture producers we know how infuriating and drawn out the stand distribution system in Milan is.

The majority however see no alternative and so endure what they must endure to ensure their presence.

Presumably with 2013 the Moormann camel has finally had one straw too many placed, roughly, on its back.

For us the bitter irony is that the vast majority of Hall 20 – which is where the contemporary manufacturers are housed – will be Italian producers who not only are presenting nothing even vaguely innovative, but whose “new” objects are not even destined to see production and are only on display to catch attention.

Wasting space for show rather than using the opportunity to allow the industry to grow and develop.

While we’ll obviously miss Moormann, we do find the resistance good. Milan’s monopoly needs to be broken, and while that will be a long process the more people who make the conscious decision not to go, and publicly justify it, the quicker we will have the alternatives the contemporary designer furniture industry so badly needs.

The one, very, positive fact in Moormann’s decision is of course that when faced with a challenge, Moormann tend to respond in the most glorious, creative, off-beat fashion.

The Bookinist Cup being one of the better examples.

We know that Morrmann have new products. We know Moormann want to show them.

We can’t wait to find out where and how that is.

Naturally, what with Moormann being Moormann, they didn’t announce their Milan absence with a simple press release.

No. Moormann developed a board game.

And we, having as ever far too much time on our hands, managed to play a quick round….

In the past couple of years we have often referred to, but never actually shown, the shelf “Das Brett” by Belgian designer Kaspar Hamacher.

A shelf that is one of our abbiding memories of Milan 2010.

That and nearly drowning…..

The release of Watn Blech by Bernhard Osann for Moormann however provides the perfect opportunity to right that wrong.

Das Brett by Kaspar Hamacher as seen at the showcase "Le Belge", Milan 2010.

What attracted us to Das Brett, and has always remained with us, was the very simple principle behind the piece.

By gently inclining the shelf towards the centre one creates a surface that provides greater stability than the traditional “flat” book shelf.

The secret of the design is in the angle of the inclination: just enough to be functional without compromising the proportions.

Watn Blech by Bernhard Osann for Moormann applies a similar principle.

Though with Watn Blech the “stability” attained is primarily not in context of the objects on the shelf. But the shelf itself.

If we remember correctly from what we learned at school “Magic” and “Physics” are synonyms.

So let’s say that through the dark beauty of magic, gently bending a piece of sheet metal increases its stability.

The secret of the design is in the angle of the bending: just enough to be functional without compromising the proportions.

In addition, through the gentle incline one creates a convenient, and inherently stable, storage surface that subtly subverts the, invariably, linear homogeneity of a room.

And because it’s a Moormann product you get a convenient, and inherently stable, storage surface with an inbuilt piece of innocent, childlike, fun…. The shelf look like it’s been incorrectly hung!!

Just delightful.

Watn Blech by Bernhard Osann for Moormann

Watn Blech by Bernhard Osann for Moormann

On Friday last week we were at a discussion in Potsdam where Nils Holger Moormann spoke as eloquently and convincingly as ever about the advantages of long lifecyles for furniture and the continual development that is possible when one understands furniture as an evolving entity and not as a quick, profit generating, commodity.

Referring, for example, to the FNP shelving system he commented, something along the lines of: even after 25 years one always finds new ways of extending and developing the system.

And it’s not just the company’s own products that are continually reworked and developed.

Inspired by the (smow)graphic department’s sensitive yet unsentimental reworking of Moormann’s former, as one now must correctly say, square logo, the good folks in Aschau put aside the pre-Christmas workload stress to help (smow) achieve a more fitting, modern corporate identity.

One of the new logos they created can be found at the top left of this page.

And indeed so happy are the (smow)bosses with the work delivered thus far, they are currently considering if they shouldn’t ask Moormann to create a logo for the new (smow)room Stuttgart. The question is, if that isn’t asking too much of the Chiemgau creative forge…..

An early attempt by (smow)blog to elongate the Nils Holger Moormann logo.

If there is a chair on the market at the moment that better symbolises how complex simplicity in design is than Pressed Chair by Harry Thaler for Moormann. We want to see it.

At Milan 2011 Nils Holger Moormann told us of the literal and figurative mountain pass that had to be negotiated before Harry’s idea could be transformed into a market ready, mass producible product.

Then ahead of Milan 2012 Harry Thaler then told us about the long way from the original experiments with wood until he had the concept that won Nils’ heart.

Now we have the most delightful film documenting the creation of the prototype in a North London metal workshop.

We don’t believe Dieter Rams included “Good design is hard work” in his list of design principles. He might want to consider adding it……

At Milan 2011 Moormann presented the prototype of Pressed Chair by Harry Thaler. At Milan 2012 the market ready version was/is being officially unveiled.

Last year Nils Holger Moormann enthused at great length about Pressed Chair. And so to complete the story, ahead of Milan 2012 we caught up with Harry Thaler in his London studio to learn more about both him and the background to Pressed Chair.

Harry Thaler on his Pressed Chair in front of his London Atelier

(smow)blog: To begin with maybe a little to your background. If we’re correctly informed you were initially a goldsmith?

Harry Thaler: Yes, I spent 10 years working as goldsmith in my home town of Merano and then I moved briefly to Vienna before doing a jewellery course at the Hochschule für Gestaltung Pforzheim. And it was my time in Pforzheim which was then the motivation to move into design – so stoked the desire to work at larger scales.

(smow)blog: And so how did you then end up at the Royal College of Art in London?

Harry Thaler: After Pforzheim I initially studied design in Bolzano, until I gave that up for lets’ say “an English reason”. There was one course that I had to complete in English, and after I had failed eight times I thought “OK, you’ll have to go to London to learn English!” So I applied to the RCA, was accepted, studied there for two years, and established my studio here in London in 2010.

(smow)blog: Given your background in jewellery. As a designer do you work more with models and “hands-on” construction or are the first design steps on the computer?

Harry Thaler: It depends a lot on the project. I am currently working on a house, and that is naturally a lot of computer based work, but then there are projects such as Pressed Chair which never involved the computer and is the result of pure experimentation.

(smow)blog: Which brings us nicely to the next question! When we look at your earlier work, we can’t see any obvious path to Pressed Chair. Was it a completely new project for you, or is there a connection to your previous work?

Harry Thaler: I would say it is rooted in my earlier work, in that if I hadn’t worked as a goldsmith I would probably never have had the idea. Obviously the scale is completely different but, for example, forming pieces of sheet metal is a typical goldsmith process.

(smow)blog: And can you remember what the initial idea was? Was there a moment of inspiration, or….

Harry Thaler: While there are projects where you wake up and the idea is there, Pressed Chair was more a  process. It started with a small fork made from one piece of wood, that was then developed further into a table, chair, stool made from one piece of wood and then came a sort of wooden wafer that was then bent to form a chair…..

(smow)blog:…… and then you thought, OK if it works with wood lets try with metal?

Harry Thaler: No, not exactly. The original plan was to make something out of just one material, which was ultimately metal. And once we had the basic form the next step was to develop it further so that the sheet was as thin as possible. If we were to take a 1cm thick piece of metal it would be much easier, so just bend it and that would be that with no need for the groove. But it is the groove that makes the chair what it is.

(smow)blog: And then the first meeting with Nils Holger Moormann?

Harry Thaler: That was in January 2011 in Cologne. I had won an Interior Innovation Award and Nils approached me at IMM.

(smow)blog: Did he already know the work or did he encounter it for the first time in Cologne?

Harry Thaler: He said that he’d been following it for some time, and I’ll never forget how he approached in Cologne, he came direct to me, no looking left or right. Just straight, focussed, to me!

(smow)blog: And how is it for you as a designer, you develop a chair, win prizes, then a company such as Moormann come and say “Great, we want to produce it. But we’ll have to make changes.” Is that something that makes you nervous, or uneasy?

Harry Thaler: No not at all! The cooperation with Moormann was excellent. They sent me pictures and I could see that it was in essence the same chair. They had made minor changes but the spirit was the same. And I was kept informed as to what was happening, it wasn’t the case that they just took it and did what they wanted without consulting me. They did a lot, but as I was kept informed and so could in effect accompany the process.

(smow)blog: And now, finally, it is on the market. Is the project for you now closed and your just waiting for the cheques to roll in, or is it still something that you think about, something that you still follow closely ?

Harry Thaler: The great thing about design is that maybe I’ll see the chair in a cafe here in London or in someone’s house, so somewhere where it has its own life. And when people take pleasure from the chair and really use it then that is something that makes me happy. But obviously I am also looking to develop the concept further into other objects such as a table or a stool.

Pressed Chair by Harry Thaler for Nils Holger Moormann

The Moormann stand in Milan was devoted to the new star in the Moormann stable. And done with a wonderful mix of biblical allegory and Hollywood glitz. In our humble opinion.

Back at Qubique Berlin we spoke to Nils Holger Moormann, and in addition to discussing the number of days spent in bed with fever following the Bookinist Cup – three appeared average amongst all participants – he also mentioned that he was busy redesigning a car.

At that point he couldn’t say more; but in December the results of the project were displayed in Bilbao during the launch of the new Renault Twingo.

Inspired by Wagon-Lit, the French for sleeping car and a term that conjures up the romance of the golden age of luxury steam train travel, Nils Holger Moormann created Wagon-lire.

A reading car.

And a design that transports the romance of the golden age of luxury steam train travel to the exigent world of car travel.
And underlines that the future is analogue.

Kitting the rear space of the Twingo out with a lightly modified FNP shelving system, a folding table and even a small fire, Nils Holger Moormann has created a car that, as he says, almost makes you hope to get stuck in a traffic jam.

A desire that is increased by the knowledge that the boot space has been fitted out with all the basic requirements for a nice roadside cuppa!

In addition to all the playful elements, Wagon-lire also employs a simple yet ingenious mechanism to allow the seat to be used from both sides. A mechanism that is an unmistakable indication that a designer created Wagon-lire, and that they did so with a very professional attention to detail.

Renault sadly couldn’t confirm when the Twingo Wagon-lire will be released onto the market. But we’ll keep you updated.

And for all who can’t quite work out what we’re on about…. a short promotional video.

Nils Holger Moormann: Wagon-lire

Although it would be wrong to say that we misled you in saying that there would be no Moormann furniture at IMM Cologne.

There was one piece.

A brave, young Strammer Max

Not in Cologne however as representative of his designer or producer, but as the Global Ambassador of an idea so genial, so eye wateringly simple, so necessary, that we’re more than a little twisted with jealousy at not having thought it up ourselves: World Furniture Day.

Looking to put the fun back into furniture the forces behind World Furniture Day are overseeing a number of events on Sunday January 22nd to help us rediscover the bond between us and our furnishings.

Because, despite what the thousands of “trend researchers” currently combing their way through IMM Cologne looking for something, anything, to proclaim as “The” trend for autumn 2012 may say; furniture isn’t about trends and continual new collections.

Aspects of the furniture industry may want us to believe it is because they calculate that by convincing us that furniture is just fashion you can sit on they can increase their profits.

These people are charlatans.

Furniture is a life-long commitment. Not a weekend of lust until something fresher comes along.

The twin highlights of the inaugural World Furniture Day are a “Chair Slam” in Berlin and a Furniture Flashmob in Cologne. In the first the public are invited to bring along their chair and convince the public why there chair is the best.

And in the second the organisers invite us all to bring a chair to Cologne City Centre, and create a “Pop-up Living Room” next to the Cathedral.

Genius!

But of course all are invited to organise their own, local, event and to celebrate as they wish.
And if not this year. Then maybe next.

Because speaking to the good Strammer Max it was clear that World Furniture Day will become an annual celebration of all that is good, fun and personal in furniture.

Or important might be a shorter way of putting it. And that the plans for World Furniture Day 2013 are well underway.

Fuller details and background information on World Furniture Day 2012 can be found at http://worldfurnitureday.com/

World Furniture Day 2012 representative Strammer Max in the IMM Cologne Press Room

Although officially a company fete at which Moormann wanted to thank their partners, dealers, designers et al for the good cooperation over the previous year; Die Hölle von Aschau was much more a family fest at which one could really feel the warmth that exists between the company and all they work with.

And that despite the sleet and wind.

This warmth was particularly evident as Nils Holger Moormann himself took to the track and was immediately surrounded by the sort of camera scrum more normally associated with George Clooney or Brad Pitt.

It was, genuinely, most touching.

In a week or so we’ll be in Cologne at IMM, in a world where hard deals are done on the purchase of leather sofas of questionable quality by over-confident reps in suits of an equally perfidious pedigree. Invariably this year using a tablet.

The Bookinist Cup was a reminder that it needn’t be so.

And we don’t just mean the fact that Vitra were a “sponsor”.

Guessing at what the whole exercise must have cost, we’re pretty certain that the money Moormann invested in Die Hölle von Aschau could easily have paid for a stand at a trade fair.

But knowing what we do about Nils Holger and his merry band of Moormänner we suspect that if it came to a direct choice between a trade fair or racing pieces of their furniture round a car park. The car park would win every time.

Something that is only possible in a world where it is understood that although profit is an unavoidable necessity; quality is the most important measure of success or failure. And that quality comes from having a real passion for what you do, about not seeing your occupation as mere work and from the fact that doing what you do makes you happy.

And so because it so eloquently reminded us that the designer furniture industry is something to be enjoyed, Die Hölle von Aschau wins a place in our highlights of 2011.

And for all who weren’t there. The official race film.

Away from the race track a real highlight of “Die Hölle von Aschau” was the Concours d’Élégance.

Ahead of the event Moormann sent out miniature Bookinist kits to their clients, partners and chums with the request that they be “pimped” and returned.

If we’re honest we don’t think that they expected to get that many back.

And so they were genuinely all the more impressed with not only the response but the very high quality of the responses.

From a Gingerbread Bookinist over Popemobiles and onto something unspeakably coarse if equally cool from Jehs + Laub, the fantasy and artistic talent of Moormann’s extended family is clearly limitless.

It was truly a delight to behold. The full gallery can be viewed here

Die Hölle von Aschau 2011: Concours d'Élégance

A kit also arrived in the (smow)HQ.

(smow) of course wouldn’t be (smow) if they simply followed rules as laid down by others. Even when the “other” is Nils Holger Moormann.

And so, yes, (smow) customised a Bookinist kit. But (smow) customised a 1:1 scale Bookinist.

Constructed in the valley’s of south Sachsen by local craftsmen using traditional production methods and employing an environmentally friendly electric motor in contrast to Moormann’s ozone challenging, and quite frankly last century, diesel motors the (smow) Bookinist was ….

…. immediately disqualified from the race!

And that despite being filled with real books, rather than stickers on other race Bookinists we could mention!

However after several appeals the race jury graciously decided to create an extra category for exceptional examples of East German engineering and the (smow) team were finally allowed into the pit lane to prepare for battle.

When the time came, the hours of training proved invaluable on the tight Aschau track and under the jubilation of the gathered thousands the (smow)pilot brought his chariot home in a very respectable time of 1:17.65

Which in a fair and just world would have been 8th place.

And then as the rest of the participants partied the night away, (smow)racing were still out and about, improving their skills on the rain soaked cobblestones of Aschau.

Much as you’d expect…..

Die Hölle von Aschau 2011: The (smow) Bookinist takes shape.....

... a test round in the Moormann car park ....

.....before blitzing round the Bookinist Cup 2011 course.

Then while others dined on and with the other competitors ...

......(smow) kept on racing through the night.